电动门的工作原理:
The working principle of electric doors:
根据三角形的三面直角边缘的变化,因此,净花在驾驶的影响下,实现联动扩展。驱车行驶在鼻子,控制器控制下磁场感应,从而实现控制器和控制电动机逆转,把鼻子校正,停止控制。和避碰、攀爬、蓝牙控制、电子感应控制等功能。
According to the changes in the three right angle edges of the triangle, the net flower achieves linkage expansion under the influence of driving. Driving through the nose, the controller controls magnetic field induction, thereby reversing the controller and controlling the motor, correcting the nose, and stopping control. And functions such as collision avoidance, climbing, Bluetooth control, electronic sensing control, etc.
自动门的基本组成部分,大致相同的,由上面,加上门信号,可以配置为一个简单的自动门系统,是能够知情人士开放的手势识别信号控制单元,从敞开的门驱动系统,人离开后又自动关上了门,并开启和关闭的过程控制系统。通常,不同种类的自动门的工作原理略有不同,具体如下。
The basic components of an automatic door are roughly the same. With the addition of a door-to-door signal, it can be configured as a simple automatic door system. It is a gesture recognition signal control unit that can be opened by informed individuals. From the open door drive system, the process control system automatically closes the door after the person leaves, and opens and closes it. Usually, the working principle of different types of automatic doors varies slightly, as follows.
二、 平移自动门原理：
2、 Principle of sliding automatic door:
当感应检测器检测到有人进入时，它会向主控制器发送脉冲信号。主控制器判断后，通知电机运行，同时监测电机的转数，以通知电机施力并在一定时间进入慢速运行。电机在接收到一定的工作电流后，正向运行，将动力传递给同步带，同步带再将动力传递到吊具系统，打开门扇；
When the induction detector detects someone entering, it will send a pulse signal to the main controller. After the main controller makes a judgment, it notifies the motor to run and monitors the speed of the motor to notify the motor to apply force and enter slow operation for a certain period of time. After receiving a certain working current, the motor runs forward and transmits power to the synchronous belt, which then transfers power to the lifting system and opens the door leaf;
在门扇打开之后，控制器进行判断。如果需要关门，通知电机反向移动并关闭门扇。
After the door leaf is opened, the controller makes a judgment. If the door needs to be closed, notify the motor to move in reverse and close the door leaf.
三、 红外自动门原理：“一般来说，人体温度恒定，通常在37摄氏度，因此会发射特定波长约10UM的红外光。红外自动门利用红外反射原理。电路中有发射模泥杆 保定古筝 塑料增韧剂 拱形护坡模具 保定空调维修  托辊生产线块和接收模块。发射模块可以发射一定频率和一定功率的红外光在遇到障碍物时，它被反射回来并被接收模块接收。经过电路或微控制器的处理后，它执行相应的功能。"
III Principle of infrared automatic door: Generally speaking, the temperature of the human body is constant, usually at 37 degrees Celsius, so it emits infrared light with a specific wavelength of about 10UM. The infrared automatic gate utilizes the principle of infrared reflection. There are transmission and reception modules in the circuit. The transmission module can emit infrared light with a certain frequency and power. When encountering obstacles, it is reflected back and received by the reception module. After processing by the circuit or microcontroller, it performs corresponding functions“